# Beware! This script will be in /rom/etc/uci-defaults/ as part of the image.
# Uncomment lines to apply:
#
# wlan_name="ImmortalWrt"
# wlan_password="12345678"
#
# root_password=""
# lan_ip_address="192.168.1.1"
#
# pppoe_username=""
# pppoe_password=""
# log potential errors
exec >/tmp/setup.log 2>&1
if [ -n "$root_password" ]; then
(echo "$root_password"; sleep 1; echo "$root_password") | passwd > /dev/null
fi
# Configure LAN
# More options: https://openwrt.org/docs/guide-user/base-system/basic-networking
if [ -n "$lan_ip_address" ]; then
uci set network.lan.ipaddr="$lan_ip_address"
uci commit network
fi
# Configure WLAN
# More options: https://openwrt.org/docs/guide-user/network/wifi/basic#wi-fi_interfaces
if [ -n "$wlan_name" -a -n "$wlan_password" -a ${#wlan_password} -ge 8 ]; then
uci set wireless.@wifi-device[0].disabled='0'
uci set wireless.@wifi-iface[0].disabled='0'
uci set wireless.@wifi-iface[0].encryption='psk2'
uci set wireless.@wifi-iface[0].ssid="$wlan_name"
uci set wireless.@wifi-iface[0].key="$wlan_password"
uci commit wireless
fi
# Configure PPPoE
# More options: https://openwrt.org/docs/guide-user/network/wan/wan_interface_protocols#protocol_pppoe_ppp_over_ethernet
if [ -n "$pppoe_username" -a "$pppoe_password" ]; then
uci set network.wan.proto=pppoe
uci set network.wan.username="$pppoe_username"
uci set network.wan.password="$pppoe_password"
uci commit network
fi
echo "All done!"
